Pace 1121-0949-P5 Precision Desoldering Tip

The 1121-0949-P5 is a 1121 Series, ThermoMax Desolder Tip with an Extended Reach. These tips are designed for the SX-100 Sodr-X-Tractor Desolder Iron Hand-Piece. The Precision Tips are designed to remove solder from through-hole solder joints, where access is an issue & Thermo-Drive Tips will not fit between the pins. The 1121-0949 offers a 3/16" diameter tip shank & measures with a .025" (.635mm) Inner Diameter (ID) x .055" (1.39mm) Outer Diameter (OD). The Pace SX-90 IntelliHeat Desoldering Iron Sodr-X-Tractor is the solder extraction handpiece for high volume operations. One of the most important aspects for successful solder removal is the selection of the proper size tip. There are several points to keep in mind. The Inside Diameter (I.D.) of the tip must be large enough to fit over the lead, while providing sufficient room so that air and solder can be drawn through the tip. The Outside Diameter (O.D.) of the tip must be slightly smaller than the diameter of the pad to prevent tip contact to the board laminate and minimize the possibility of damage.

Pace 1121-0949-P5 Precision Desoldering Tip Highlights:

• Pace SX-90 IntelliHeat Desoldering Iron Sodr-X-Tractor is the solder extraction handpiece for high volume operations
• One of the most important aspects for successful solder removal is the selection of the proper size tip
• Tips are designed for the SX-100 Sodr-X-Tractor Desolder Iron Hand-Piece
• Inside Diameter (I.D.) of the tip must be large enough to fit over the lead, while providing sufficient room so that air and solder can be drawn through the tip
• Outside Diameter (O.D.) of the tip must be slightly smaller than the diameter of the pad to prevent tip contact to the board laminate and minimize the possibility of damage

Pace 1121-0949-P5 Precision Desoldering Tip Specs:

• Brand: Pace
• SKU: 1121-0949-P5
• Series: 1121
• Product Type: Precision Desoldering Tip
• Outside Diameter: 1.39mm (0.55")
• Inside Diameter: 0.635mm (0.25")