HAKKO FR870B-04 IR PCBoard Preheater
The FR-870B is a bench-top board heater designed to elevate the temperature of printed circuit board assemblies so that components on them can be soldered and de-soldered more easily, and with improved results.
| Manufacturer | HAKKO |
|---|---|
| Manufacturer Part Number | FR870B-04 |
| Technimark SKU | HAKFR870B-04 |
HAKKO FR870B-04 IR PCBoard Preheater
The FR-870B is a bench-top board heater designed to elevate the temperature of printed circuit board assemblies so that components on them can be soldered and de-soldered more easily, and with improved results. This is particularly useful on medium to high-mass board assemblies, which can “heat-sink” a significant amount of energy being supplied by a soldering iron tip, or handheld hot-air tool. This tool is particularly useful when soldering Pb-free assemblies.
The FR-870B is an updated replacement for the popular Hakko FR-870 IR Preheater that includes an upgrade to use the new high efficiency carbon filament lamps and the new software features found in the FR-872 4-zone IR preheater, thus allowing you to control the ramp rate at 1, 2, or 3 degrees Celsius per second when you are in one of the two thermocouple modes.
Hakko FR870B-04 PreHeater Highlights:
- Infrared Pre-Heater that provides the optimal heating effect over the whole workpiece surface
- 2 Independent switchable work grid partitions
- Infrared carbon heater
- 2 independent switchable zones
- 248 mm x 140 mm PCB capacity
- Manual or Auto modes of operation
- Preheat control by Power or Thermocouple
- Soft EPO to protect assemblies
- Small footprint and low profile
- Faster than ceramic IR heating
- Integrates with the Hakko FR-803B and FM-206
- Easy to remove reflector for cleaning and finding lost components
The Hakko FR870B-04 PreHeater Specs:
HAKKO FR870B-04 IR PCBoard Preheater Highlights:
- 2 independent switchable zones
- 248 mm x 140 mm PCB capacity
- Manual or Auto modes of operation
- Preheat control by Power or Thermocouple
- Soft EPO to protect assemblies
- Small footprint and low profile
- Faster than ceramic IR heating
- Integrates with the Hakko FR-803B and FM-206
- Easy to remove reflector for cleaning and finding lost components
- HAKKO FR870B-04 IR PCBoard Preheater Specs:
HAKKO FR870B-04 IR PCBoard Preheater Specs:
- Brand: Hakko
- SKU: FR870B-04
- Input Voltage: 120 VAC 50/60 Hz
- Power Consumption: 730W
- Board Capacity: 9.8 x 5.5 in. (248 x 140 mm)
- Effective Heating Area (W x D): 7.5 x 3.2 in. (190 x 80 mm)
- Maximum Board Depth: 8.7 in. (220 mm)
- Heating Zones: 2
- External T/C Range: 122 - 392°F (50 - 200°C)
- External T/C Stability: ±9°F (±5°C)
- Power Range: 0 - 100% (1% increments) T/C Inputs 1
- Heater Type: High Efficiency Carbon Filament
- Heater Lamp MTBF: ~2100 hours
- External Connections1: 1 - integrates with FM-206
- Weight: 7.1 lb. (3.2 kg)
| Manufacturer | HAKKO |
|---|---|
| Manufacturer Part Number | FR870B-04 |
| Technimark SKU | HAKFR870B-04 |
