Emit 60473 Chargebuster 36 Overhead Ionizer with Three 3-Blade Fans, 120VAC US Plug
The Desco 60473 is a overhead ionizer with a material category of metal. Desco Chargebuster Overhead Ionizers are steady-state DC ionizers designed for use in ESD protected areas. 3-fan ionizers have a 2.0' x 5.0' coverage area.
| Manufacturer | EMIT |
|---|---|
| Manufacturer Part Number | 60473 |
| Technimark SKU | EMT60473 |
Emit 60473 Chargebuster 36" Overhead Ionizer with Three 3-Blade Fans, 120VAC US Plug
The Desco 60473 is a overhead ionizer with a material category of metal. Desco Chargebuster Overhead Ionizers are steady-state DC ionizers designed for use in ESD protected areas. 3-fan ionizers have a 2.0' x 5.0' coverage area. The Chargebuster Overhead Ionizers' discharge times (< 3.0 seconds at 18") and low offset voltage (±10 volts) meet the required limits of ANSI/ESD S20.20 < ±35 volts tested per ANSI/ESD STM3.1 and ESD TR53. Its emitters are made of pure tungsten and spaced further apart to minimize ion recombination, increase discharge efficiency and provide a broader coverage area. The fans have 3-speeds (high, medium, low) which produce consistent performance at all 3-settings. The Chargebuster Overhead Ionizers utilize an auto-feedback system that continuously optimizes its performance and automatically alarms and shuts down should its supply voltage drop.
Emit 60473 Chargebuster 36" Overhead Ionizer Highlights:
- Auto-feedback system (audible and visual alarm through single tri-color LED)
- 120/220 VAC input voltage selectable
- 3 position fan speed: low, medium, high
- Replaceable emitter pin
- NIST calibrated with certificate
- 24 x 60 auto-balanced coverage area
- Superior decay rate (average <3 seconds)
- Consistent balance ±10 Volts
- Auto shut down and alarm if/when supply voltage drops
- Field replaceable emitter pins allow for minimal downtime
- Unit can we used with 110V or 220V power sources
- Measures 3.5" H 6.5" W x 37" L
- Input Voltage and Frequency: Internally selectable for 100-120 VAC, 50/60 Hz
- Power Consumption: 3-Fan Overhead: 36 W
- Dimensions: 3-Fan Overhead: 3.9" H x 6.6" W x 37.3" L (99 mm x 168 mm x 947 mm)
- Neutralization (Discharge) Time at 18": < 3.0 seconds
- Airflow (three-speed fans): 3-Fan Overhead: 150-300 CFM
- Emitter Points: 0.050" diameter tungsten
- Ion Emission: Steady-state DC with sense feedback
- Fuse: 400 mA slow blow
- High Voltage Power Supply: 5.5 kVDC nominal
- Ozone: <0.05 ppm
- Enclosure: Powder coated steel
- Mounting Options: Rigid-mounted or suspended from ceiling
- Certifications: CE
- Typical positive and negative discharge times (1000V to 100V) measured using ANSI/ESD STM 3.1 are shown in the "Neutralization (Discharge) Times" section. The performance of the ionizer was measured with the unit positioned as shown, with the fan speed on high and without a filter
Included
- Hanging Kit
- Power Cord, North American Plug
- Emitter Point Cleaners
- Certificate of Calibration
Emit 60473 Chargebuster 36" Overhead Ionizer Specs:
- Brand: Emit
- SKU: 60473
- Product Type: Overhead Ionizer
- Voltage Rating: 120V ac
- Material:Chassis: Steel
- Material Category: Metal
- Air Volume: 300cfm
- Ozone Level: <0.05ppm
- Coverage Area: 2 x 5ft
- Dimensions: 37.3 x 6.6 x 3.9in
- Length: 37.0 in
- Height: 3.0 in
- Width: 6.0 in., 6.6in
- Depth: 3.9in
- Maximum Operating Temperature: +80°F
- Minimum Operating Temperature: +65°F
- Standards Met: ANSI/ESD S20.20, ANSI/ESD STM3.1, ANSI/ESD S20.20, ANSI/ESD STM3.1, CSA
| Manufacturer | EMIT |
|---|---|
| Manufacturer Part Number | 60473 |
| Technimark SKU | EMT60473 |






