Desco 10513 Static Dissipative Statguard, Floor Finish [1 Gallon]

The Desco 10513 is a statguard low-voc dissipative floor finish that will transform a non ESD flooring to an ESD protective floor and is listed as slip resistant. The low-VOC floor finish allows the treated floor to act as a theoretical charge resevoir or natural ground. The capacitance and surface resistant of Statguard floor finish treated floors will decay 5000 volt charge to 0 in less than 0.1 seconds when tested to federal test Method standard 101C, Method 4046. Classified by UL as to slip resistance only, Statfree and Statguard provide superior electrical properties along with a safe walking surface. Underwriters Laboratory has evaluated Statfree and Statguard and tested them to their slip resistance standards. To ensure employee safety and to mitigate user's liability exposure, it is important to use floor finish that has been successfully tested for slip resistance, and is properly applied and maintained. RTT: 10E7 ohms per ANSI/ESD S4.1 50% R.H.

Desco 10513 Static Dissipative Statguard, Floor Finish, Highlights:

• Static Dissipative Cross-Linked Floor Finish; Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
• Dissipative (1 x 106 to < 1 x 1010 ohms) Coating - ANSI/ESD S7.1 and ESD TR53 meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
• Low Tribocharging (<100 volts) Coating - ANSI/STM 97.2 meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring.
• 18% Solids- 3 Coat System reduces labor needed for initial install and on-going maintenance of the floor
• UL Listed for Slip Resistance tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user’s liability exposure
• Lead-free RoHS Compliant

Desco 10513 Static Dissipative Statguard, Floor Finish Specs:

• Brand: Desco
• SKU: 10513
• Density: 8.4
• Container Size: 1 Gallon
• Container Type: Gallon Bottle
• Physical Form:Liquid
• Coverage Area: 2,000 sq. ft/gallon
• Product Type: Dissipative Floor Finish
• Chemical Composition: Diethylene Glycol Monoethyl Ether