Desco Mini Monitor with North America Power Adapter
Special Price $171.36 Regular Price $178.50
Availability: In stock
Only 1 left
SKU
DES19341
Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface Makes the status of the operator and worksurface highly visible to the operator and supervisor.
| Manufacturer | DESCO |
|---|---|
| Manufacturer Part Number | 19341 |
| Technimark SKU | DES19341 |
Desco Mini Monitor with North America Power Adapter
- Single Workstation Continuous Monitor
- Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
- NEW Illuminated Enclosure¹
- Makes the status of the operator and worksurface highly visible to the operator and supervisor
- IMPROVED Continuous Visual and Audible Alarms
- Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs; illuminates blue to indicate standby mode
- NEW Park Delay Timer and ParkSnap™
- Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
- NEW Mat Monitor Switch
- Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
- NEW Audible Alarm Adjustment
- Sets the audible alarm volume from loud to louder
- Wave Distortion Technology
- Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground² and the presence of its 1 megohm safety resistor
- Threaded Worksurface Grounding and Mounting
- Grounds and monitors the worksurface with no additional wire
- Single-Wire Impedance Design
- Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
- 1.2 Volt Operator Test Voltage
- Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
- <50 Millisecond Alarm Response Time
- Identifies failures and intermittencies that inferior technologies miss
- Desco 19344 Ring Magnets
- Mounts the monitor in areas without a worksurface
- Calibration Verification
- Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
- NIST Calibrated – Original Calibration Certificate can be Downloaded Here
- Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see
- Calibration.
- 100-240VAC Safety Certified Power Adapter with North American Plug
- Works with standard electrical systems in North America, Japan, and Asia
- Made in the United States of America
- This item is made and stocked in Chino, CA
| Manufacturer | DESCO |
|---|---|
| Manufacturer Part Number | 19341 |
| Technimark SKU | DES19341 |
Write Your Own Review