The Desco 60509 Motion Sensor for Ionizers, 120VAC is designed to automatically activate an ionizer when an operator is present at a workstation and turn off when the workstation is vacant. This product ensures that the ionizer is activated when required. It also conserves energy and increases maintenance intervals of the ionizer by deactivating it when the workstation is vacant.

The Ionizer Motion Sensor consists of two components: the Sensor Unit and Control Unit. The Control Unit is capable of switching up to 5 amps at 120VAC, is fuse protected, and connects between the AC power cord and the ionizer power input using standard IEC type (C13/C14) connectors. The sensor unit is placed in a position to "detect" an operator up to three feet away. The sensitivity levels can be adjusted to: low (12 inches), medium (24 inches) or high (36 inches). The Sensor Unit should be mounted flush with the front edge of the mounting surface whenever possible. This is done to prevent reflected light from the mounting surface. The two components communicate using a standard 6-pin modular cable.

The Ionizer Motion Sensor utilizes a unique infrared light and band pass filter to prevent interference from other light sources. The band pass filter uses a reflected infrared light with the specific frequency to sense the presence of the operator. It does not require continuous motion to remain activated. The deactivation delay time can be set to 1 minute, 10 minutes or 1 hour periods. This delay prevents the ionizer from turning on and off frequently if an operator is only away from the workstation momentarily.

Desco 60509 Motion Sensor Power Saver Highlights:

• Motion sensor to activate ionizer
• Use to activate an ionizer when an operator is present and deactivates when the workstation is vacant to conserve energy and reduce ionizer maintenance
• Infrared sensor with band pass filter utilizes a unique infrared light and filter to prevent interference from other light sources
• Adjustable sensitivity level: Low, Medium, and High
• Variable sensitivity ensures that ionizer activates when a person enters the work area
• Time delay adjustment: 1 Minute, 10 Minutes, 1 Hour
• Easy-to-Install sensor housing
• Included Hook and loop strips or screws to mount the sensor at a convenient location
• IEC C14 Style Inlet - IEC C13 Outlet
• For use with Benchtop and Overhead Ionizers

Desco 60509 Motion Sensor Power Saver Specs:

• Brand: Desco
• SKU: 60509
• Product Type: Motion Sensor
• Voltage Rating: 120V ac
• Current Rating: 5A
• Dimensions: 3 x 2 x 0.9in
• Length: 8.0 in
• Height: 3in, 8.0 in
• Width: 2in, 8.0 in
• Depth: 0.9in
• For Use With: Charge Buster Ionizer
• Includes: Sensor Unit, Control Unit, 120 VAC, Modular Cable, 2, Modular Cable, 7 ft Hook and Loop Fastener Strips, Screws