ASG Premium Torque Arm Catalog

Premium Torque Arms

Products and Solutions for Assembly

About ASG

ASG, Division of Jergens, Inc. is an ISO 9001:2008 certified manufacturer, provider and service center for products and solutions focused around assembly. Since the 1970s, we have developed a first-class reputation unrivaled in the industry offering a wide range of world class products through our various world wide locations.

We offer a wide selection of products including: electric, pneumatic and manual torque control screwdrivers; torque and angle control precision fastening systems; automatic screw feeders and screw presenters; torque testers and calibration services; custom designed automation equipment as well as a full line of accessories.

ASG also offers a selection of value-added products and solutions including engineering and consulting services, financing, and extended protection and maintenance plans.

Industry Commitment

ASG is committed to the highest quality standards, ensuring that all processes and procedures are followed to produce the best products for our customers. We maintain ISO 9001:2008 certification for the manufacture, distribution, and service of assembly tools. Maintaining membership in key industry organizations in order to stay abreast of the most current industry trends and information is vital to serving our customers.

We are personally
committed to understanding and exceeding our customers’ requirements. We are committed to continuously improving our products and processes.

We are dedicated to
delivering products, services, and solutions on time and at a competitive value.

Automation Product Group Engineered Performance

The ASG Automation group provides custom solutions to meet both the imminent and inevitable expectations of our clients. Underpinned by world class knowledge of threaded fastening, our systems are distinctive in their operation; providing market leading precision. With robust elements of flexibility and expansion built in, the systems are designed to persevere life cycle changes to provide our customers with the ultimate automated solution.

Table of Contents

Section 1: Telescoping Torque Arms

TTA Series Telescoping Torque Arms

• Torque reaction is kept perpendicular to arm axis
• Efficient design for torque reaction
• High strength carbon fiber arm

Degree Angle of Tool Holder Movement

 
• When purchasing a Telescoping Torque Arm, the following also must be purchased:
• (1) Tool Holder (unless noted as included)
• (1) Tool Balancer
• NOTE: Suggested standard tool holder and standard tool balancer are listed in the main chart below.
• NOTE: For specifications on the suggested options, please see the Standard Tool Holder Specifications and Standard Tool Balancer Specifications charts on the next page. If in need of a different option, additional products, information and images can be found on pages 18 (Tool Holder) and 24 (Tool Balancer).
• Optional balancer bracket kit (ASG #90023) is available to keep the balancer cable in a protected position.

Telescoping Torque Arms

Suggested Standard Tool Holder and Balancer Specifications

Additional information and images can be found on page 18 (Tool Holder) and 24 (Tool Balancer)

Telescoping Torque Arms

TPTA-2E Series Telescoping Torque Arms with 2 Encoders

• Torque reaction is perpendicular to arm axis
• Tool positioning detection on X-Y axis
• Designed for use with the ASG Nav-P 4.0 System
• Ensures the correct tightening sequence
• Torque arm with wall attachment included
• When purchasing a Telescoping Torque Arm with 2 Encoders, the following also must be purchased:

Degree Angle of Tool Holder Movement

• (1) Tool Holder
• (1) Tool Balancer
• (1) ASG Nav-P 4.0 System (ASG #90073)

• (1) ASG-AC2500-IC20 and (1) ASG-AC2500-OC20 I/O cables when con- necting to ASG CT-2500 controller

• NOTE: Suggested standard tool holder and standard tool balancer are listed in the main chart below.
• NOTE: For specifications on the suggested options, please see the Standard Tool Holder Specifications and Standard Tool Balancer Specifications charts on the next page. If in need of a different option, additional products, information and images can be found on pages 18 (Tool Holder) and 23 (Tool Balancer).

Telescoping Torque Arms

Suggested Standard Tool Holder and Balancer Specifications

Additional information and images can be found on page 18 (Tool Holder) and 23 (Tool Balancer

Telescoping Torque Arms

TPTA-3E Series Telescoping Torque Arms with 3 Encoders

• Torque reaction is perpendicular to arm axis
• Tool positioning detection on X-Y-Z axis
• Designed for use with the ASG Nav-P 4.0 system
• Ensures the correct tightening sequence
• Torque arm with wall attachment included
• When purchasing a Telescoping Torque Arm with 3 Encoders, the following must also be purchased:

Degree Angle of Tool Holder Movement

• (1) Tool Holder
• (1) Tool Balancer
• (1) ASG Nav-P 4.0 System (ASG #90073)
• (1) ASG-AC2500-IC20 and (1) ASG-AC2500-OC20 I/O cables when connecting to ASG CT-2500 controller
• NOTE: Suggested standard tool holder and standard tool balancer are listed in the main chart below.
• NOTE: For specifications on the suggested options, please see the Standard Tool Holder Specifications and Standard Tool Balancer Specifications charts on the next page. If in need of a different option, additional products, information and images can be found on pages 18 (Tool Holder) and 23 (Tool Balancer).

Telescoping Torque Arms

Suggested Standard Tool Holder and Balancer Specifications

Additional information and images can be found on page 18 (Tool Holder) and 23 (Tool Balancer

Section 2: Vertical Telescoping Torque ArmsTTAV 

Series Vertical Telescoping Torque Arms

• Torque reaction is perpendicular to arm axis
• Efficient design for torque reaction
• High-module carbon fiber arm
• When purchasing a Vertical Telescoping Torque Arm, the following also must be purchased:
• (1) Tool Holder
• (1) Tool Balancer
• NOTE: Suggested standard tool holder and standard tool balancer are listed in the main chart below.
• NOTE: For specifications on the suggested options, please see the Standard Tool Holder Specifications and Standard Tool Balancer Specifications charts on the next page. If in need of a different option, additional products, information and images can be found on pages 18 (Tool Holder) and 22 (Tool Balancer).

Degree Angle of Tool Holder Movement

Vertical Telescoping Torque Arms

Suggested Standard Tool Holder and Balancer Specifications

Additional information and images can be found on page 18 (Tool Holder) and 23 (Tool Balancer

Section 3: Torque Tubes

TT Series Torque Tubes

• Torque reaction is parallel to arm axis
• Anti-rotation design
• Torque arm with mounting attachment included
• Smooth sliding with ball splined shaft
• When purchasing a Torque Tube, the following must also be purchased:
• (1) Tool Holder
• (1) Tool Balancer (Inline or Right Angle)
• NOTE: Suggested standard tool holder and standard tool balancer are listed in the main chart below.
• NOTE: For specifications on the suggested options, please see the Standard Tool Holder Specifications and Standard Tool Balancer Specifications charts on the next page. If in need of a different option, additional products, information and images can be found on pages 19, 21 (Tool Holder) and 23 (Tool Balancer).

Torque Tubes

Suggested Standard Tool Holder and Balancer Specifications

Additional options, information and images can be found on page 19, 21 (Tool Holder) and 23 (Tool Balancer)

Section 4: Folding Torque Arms

FTA Series Folding Torque Arms

• Folding torque arm which allows perpendicular tightening to workbench plane
• Standard tool holder included. See Standard Tool Holder Specifications chart on next page for more information.
• Encoder Arms are available. If the encoder style arm is purchased, the ASG Nav-P 4.0 System (ASG #90073) is required.
• Arms with Pneumatic Downward Assistance are available. Contact ASG for additional information.
• Arms with 3 Encoders are available, contact ASG for additional information.
• When using ASG’s SD2500 screwdriver, ASG recommends the ASG SD2500 tool holder (ASG #90113). See page 20 for more information.
• When purchasing a Folding Torque Arm, the following must also be purchased:
• (2) Tool Balancers
• If an encoder arm is purchased, the ASG Nav-P 4.0 (ASG #90073) is required
• (1) ASG-AC2500-IC20 and (1) ASG-AC2500-OC20 I/O cables when connecting to ASG CT-2500 controller
• NOTE: For specifications on the suggested options, see the Standard Tool Holder Specifications and Standard Tool Balancer Specifications charts on the next page. If in need of a different option, additional products, information and images can be found on pages 20 (Tool Holder) and 24 (Tool Balancer).

Folding Torque Arms

Suggested Standard Tool Holder and Balancer Specifications

Additional options, information and images can be found on page 20 (Tool Holder) and 24 (Tool Balancer)

Section 5: Linear Torque Arms

LTAE Series Linear Torque Arms

• Torque reaction is parallel to arm column
• (2) of the same balancers are required with the Linear Torque Arm (LTAE) models
• Standard tool holder included. See Standard Tool Holder Specifications chart on next page for more information.
• Optional encoder arms are available. If the encoder style arm is purchased, the ASG Nav-P 4.0 System (ASG #90073) is required.
• Arms with Pneumatic Downward Assistance are available. Contact ASG for additional information.
• Arms with 3 Encoders are available, contact ASG for additional information.
• When using ASG’s SD2500 screwdriver, ASG recommends the ASG SD2500 tool holder (ASG #90114 or ASG #90094). See page 20 for more information.
• When purchasing a Linear Torque Arm, the following must also be purchased:
• (2) Tool Balancers
• If an encoder arm is purchased, the ASG Nav-P 4.0 (ASG #90073) is required
• (1) ASG-AC2500-IC20 and (1) ASG-AC2500-OC20 I/O cables when connecting to ASG CT-2500 controller
• NOTE: For specifications on the suggested options, see the Standard Tool Holder Specifications and Standard Tool Balancer Specifications charts on the next page. If in need of a different option, additional products, information and images can be
found on pages 20 (Tool Holder) and 24 (Tool Balancer).

Linear Torque Arms

Suggested Standard Tool Holder and Balancer Specifications

Additional options, information and images can be found on page 19, 21 (Tool Holder) and 23 (Tool Balancer)

Section 6: Accessories

Tool Holders for Telescoping Torque Arms (TTA, TPTA, and TTAV)

Multi-Position Tool Holders for Telescoping Torque Arms (TTA, TPTA, and TTAV)

Requires purchase of multi position tool holder, multi-position tool holder interface and extension (if the extension is needed)

Accessories

Multi-Position Tool Holders for Telescoping Torque Arms (TTA, TPTA, and TTAV) (Continued)

Tool Holders for Torque Tubes (TT)

Accessories

Tool Holders for Folding and Linear Arms (FTA and LTAE)

SD2500 Tool Holders (FTA and LTAE)

• Designed specifically for use with the ASG X-PAQTM SD2500 tool

Accessories

Swivel Holders for Select Arms

• Customer must provide tool grip diameter when placing the order – tool adapter will be supplied according to below dimension

Proper Tool Holder Configuration

Accessories

Tool • Optional balancer bracket kit is available to keep the balancer cable in a protected position

• Optional balancer bracket kit is available to keep the balancer cable in a protected position
• For use with Telescoping Torque Arms (TTA Models)
• Easy installation and replacement

Tool Balancer Kits for Telescoping Vertical Torque Arms (TTAV)

Accessories

Tool Balancer Kits for Telescoping Torque Arms with Encoders (TPTA)

Tool Balancer Kits for Torque Tubes (TT)

Accessories

Tool Balancers (TTA, FTA, and LTAE)

Tool balancers designed for Telescoping, Linear and Folding Torque Arms (TTA, FTA, and LTAE Series). For all other arm types, see tool balancer kits on pages 22 and 23.