JBC Tools Soldering Station Product Guide

JBC Tools Soldering Station Product Guide

JBC Exclusive Heating System

JBC Stations work with JBC Exclusive Heating System, which recovers tip temperature extremely quickly. This increases work efficiency and allows the user to work with lower temperatures.

350oC/662oF in 2 seconds

*This graph compares JBC C210 Cartridge Range to
the equivalent cartridges of the best competitor.

Efficient Temperature Control
Comparative process of 3 solder joints

Tips with JBC technology only drop 30oC (54oF)
where others drop as much as 70oC (126oF).

A global organization at your service JBC is a global company with a distributor network spanning 5 continents that guarantees a solid commercial organization with quick and efficient service. The power of experience More than 90 years of experience have placed JBC at the technological forefront of tools for soldering and rework operations in electronics. Innovation, efficiency and reliability are the key features of a wide range of products which have been designed to satisfy the most demanding requirements of professionals. High technology, superior quality Product perfection is one of the main objectives of JBC’s improvement and development program. The R&D department has created the most innovative soldering technologies, which JBC is proud to present in this catalogue. ESD safe All JBC products comply with CE standards and ESD recommendations.

Intelligent Heat Management

Thanks to automatic detection of the tool in the stand, JBC Soldering and Rework Stations allow the tools to enter into Sleep & Hibernation Modes when not being used. As a result, tip life lasts up to 5 times longer.

Sleep Mode

Sleep Mode automatically lowers tip temperature below the solder melting point when the tool rests in the stand. It prevents the dissolution of the tip iron coating into molten solder.

Hibernation Mode

After a configurable period of tool inactivity in the stand, the tool enters into Hibernation Mode.
It cuts off the power supply making the tip reach room temperature thus preventing oxidation and saving energy.

Longer Tip life

Tip life increases exponentially by using lower temperatures as shown. Using Sleep Mode, the temperature is further reduced, which multiplies tip life by 5.

Cartridges with extended tip life

The essential part of the soldering iron is the tip. Therefore, JBC has over 500 cartridge models of different shapes and sizes to choose from, depending on each application.
JBC has developed the most advanced technology based on the following principles:

Excellent Heat Transfer
The compact element reduces thermal barriers.

Instantaneous Heating
A fully-integrated thermal sensor in the heater ensures quick temperature recovery.

Great Durability
The intelligent algorithm control program extends tip life.

Compact Stations

Everything you need in minimum footprint.

Intelligent Heat Managament
The stations incorporate Sleep & Hibernation Modes which lower tip temperature when the tool is placed in the tool holder. As a result, JBC tips lasts up to 5 times longer than other brands.

Intuitive Menu and Interface
Fast and easy station configuration thanks to the 7-key keypad. User-Friendly Menu allows you to personalize over 20 parameters to help manage the soldering process. Set temperature limits, check usage counters, lock the station with a PIN or program Sleep & Hibernation Modes.

Quick Cartridge Extractor and Holder
Save time and increase productivity by using Quick Cartridge Extractor, which facilitates fast and safe use of different cartridge geometries.
Cartridge Holder
allows to store up to four cartridges.

Work position
JBC stations are designed to suit the user’s work position. Tool Holder and Cable Collector are easily adjustable.

Communication station-PC
The incorporation of a USB Connector on all stations and control units allows you to manage your job remotely from a PC. The most innovative technology to take your work beyond the station.

Tip Cleaning System
CD Compact Stations feature a tip cleaner with antisplash rubber to prevent splashing of solder particles and maintain the work area clean. The most complete Cleaning System allows you to choose from three safe methods according to your needs: metallic wool, sponge or metal brush. The integrated wiper also allows you to remove excess solder from the tip single-handedly.

JBC Tools Soldering Stations

CDS
Precision Soldering Station
This station is ideal when working on populated PCBs or under a magnifying glass. It includes T210 Precision Handle.

CDB
Soldering Station
This station is suitable for both SMD or THT components. It includes T245 General Purpose Handle.

CDA
Solder Feed Station
The perfect station for applications requiring a free hand to solder wire, connectors, transformers or THT components. It includes AP250 Solder Feed Iron.

Rework

CDP
Micro Tweezers Soldering Station
The best solution for soldering and rework of SMD such as chips, small/ medium SOP components and dual line components. It includes AM120 Adjustable Micro Tweezers.

CDD
Desoldering Station
The perfect station for precision desoldering jobs of THT components and SMD pad cleaning. It includes DS360 Micro Desoldering Iron.

CDES / CDEB
Precision / Soldering-Assistant Station
Improve your soldering quality while improving your skills.
For more information consult CDE brochure or www.jbctools.com.

JBC Tools Cartridge Map

Modular System

Set up your personalized station according to your soldering or rework needs.

Modular System Map

JBC Tools Tip Cleaning Systems

CLU
Senior Tip Cleaner
CLU Tip Cleaner cleans the tip in less than 1 second providing a thorough and gentle tip cleaning. It features two working modes: Sensor and Continuous, and it is designed to keep the work area free of Foreign Object Debris (FOD).

CLM
Manual Tip Cleaner
A complete cleaning system with splashguard and antisplash membrane to keep the work area clean and free of solder particles.

Premium Stations

Different solutions based on the JBC Modular System specially designed for different soldering and rework processes.

Nano Stations

NAN
2-Tool Nano Soldering Station
The best solution for soldering SMD requiring the highest precision. It includes two NT115 Nano Handles.

NAS
2-Tool Nano Rework Station
The best solution for rework SMD requiring the highest precision. It includes NT115 Nano Handle and AN115 Adjustable Nano Tweezers.

Heavy Duty Stations

HD
Heavy Duty Station
The most powerful soldering unit of the JBC Range. It includes T470F Thermal Insulator Grip HD Handle.

HDP
Heavy Duty Tweezer Station
Designed to reduce the soldering time in applications that requires a large amount of heat transfer.
It includes two HDU Control Units and HT470 Heavy Duty Thermal Tweezers.

Auto Feeders

ALE
Auto-Feed Soldering Station
The ideal solution for the soldering process requiring a free hand. It includes ALE250 Auto-Feed Iron and GALE10V Guide Kit.

SF
Automatic Solder Feeder Station
Allows feeding solder wire automatically from any position. It includes the ergonomic SF280 Automatic Solder Feeder and GSF10V Guide Kit.

Rework

DDS
2-Tool DDU Desoldering Station
DDS Station is a complete solution to rework circuits with T245 General Purpose Handle and DR560 Desoldering Iron.
DDU Control Unit manages up to two tools simultaneously and is fully compatible with 10 different JBC Tools.

DDP
2-Tool DDU Precision Rework Station
DDP Rework Station is a perfect solution for fast and precise SMD rework of chip components and small outline ICs.
This rework station comes with T210 Precision Handle and AM120 Adjustable Micro Tweezers. DDU Control Unit manages up to two tools simultaneously and is fully compatible with 10 different JBC Tools.

DMS
4-Tool DMU Desoldering Station
DMS Station is a complete solution to rework circuits with T245 General Purpose Handle and DR560 Desoldering Iron.
DMU Control Unit manages up to four tools simultaneously and is fully compatible with 10 different JBC Tools.

DMP
4-Tool DMU Precision Rework & Desoldering Station
DMP Station is a complete solution to rework circuits with T245 General Purpose Handle,
DR560 Desoldering Iron, T210 Precision Handle and AM120 Adjustable Micro Tweezers.
DMU manages up to four tools simultaneously and is fully compatible with 10 different JBC Tools.

Complete Rework Station

RMS
Complete Rework Station
The quickest and safest solution to solder and rework all kinds of SMDs.
DDU Control Unit manages up to two tools simultaneously and is fully compatible with 10 different JBC Tools.
MSE Electric Desoldering Module is indispensable for a complete desoldering process.
JT Hot Air Station controls the rework task using temperature and airflow profiles.
This station includes DR560 Desoldering Iron, T245 General Purpose Handle and JTT Heater Hose Set.

Preheaters

The complete system for preheating multi-layer PCBs and ideal for repetitive soldering jobs. Preheater is used as a secondary heat source to reduce the thermal gap between the soldering tool and the PCB, reducing thermal shock of components and PCBs.

PHXK
XL Preheater Set
This is a complete system for preheating big-sized PCBAs such as communications boards, airplanes, etc. and ideal for repetitive soldering jobs. It features a heating area of 510 x 610 mm / 20.07 x 24 in and works with up to eight thermocouples.

PHBK
Large Preheater Set
PHBK Large Preheater Set is the best solution for rework on medium / large PCBAs, such as the ones commonly used in circuit board and/or lap tops. It features a heating area of 360 x 277 mm / 14.2 x 10.9 in and four TC connections.

PHSK
Small Preheater Set
PHSK Small Preheater Set is the best solution for rework on small / medium PCBAs, such as the ones commonly used in electronics industry. It features a heating area of 130 x 135 mm / 5.12 x 5.31 in and four TC connections.

PHNK
Nano Preheater Set
It is the best solution for rework on small PCBAs, such as the ones commonly used in smartphones. It features a heating area of 108 x 70 mm / 4.25 x 2.75 in and two TC connections.

Hot Air Stations

JNA
High-Precision Hot Air Station
The only hot air station to rework, position and remove SMD whithout affecting nearby components. It includes NH High-Precision Heater Hose Set and T260 Pick & Place Handle.

TE
Precision Hot Air Station
Precision hot air station capable of reworking small and medium SMD. It includes TET Precision Hose Set.

JT
Hot Air Station
A high-powered hot air station capable of reworking all types of SMD. It includes JTT Heater Hose Set.

Complete Rework Station

SRS
SMD Rework System
SRS SMD Rework System provides full control over SMD rework processes. JT Hot Air Station controls the rework task using temperature and air flow profiles. RWS Rework Arm supports JTT Heater Hose Set, allowing handsfree operation. PHSK Small Preheater Set comes with PHS Small Preheater and PSS Small PCB Support. A variety of Protectors, Extractors and Tripods are included.

Wire Stripper Stations

Specially designed for stripping high-temperature wire insulations made of thermostable materials.

WSS
High-Temperature Precision Wire Stripper Station
This station includes WS140 High-Temperature Precision Wire Stripper Tweezers.

WSB
High-Temperature Wire Stripper Station
This station includes WS440 High-Temperature Wire Stripper Tweezers.

A complete tooling range for high precision

Nano Rework Shop for reworking small SMD - such as 01005 - follows the worldwide trend of nano solutions. Its complete range of tools offers high precision and maximum control - even under a magnifying glass - allowing a fast and efficient work process.