JBC Tools JNA High-Precision Hot Air Station
|
| Intuitive menu | Pedal | Pick & Place |
| JNA Station has an intuitive menu that allows setting up the station parameters easily. | By means of P405 Pedal connection, the Heater Hose Set for hot air function and T260 Pick & Place Tool for suction function may be activated and deactivated. |
The station includes a Pick & Place functionality to position and remove components with high precision. |
 |
 |
 |
Auto-Start/Stop Function
The tool is turned on when lifted from the stand, and the auto- stop function, as a safety measure, guarantees that the heat is automatically cut off when the tool is in the stand. It is safer and more efficient.
Changing Cartridge
Save time and increase productivity by using NHS Stand, which facilitates fast and safe use of the cartridge.
Cartridge
J125010 Cartridge is perfect to rework the smallest SMDs from 01005 to SOIC-8 under the magnifying glass.
JBC Tools JNA Specifications
| Dimensions | 180 x 170 x 110 mm / 7.1 x 6.7 x 4.3 in |
| Weight | 1.35 Kg / 2.96 lb |
| Ref. - Voltage (AC) |
JNASE-9A - 100 V 50/60 Hz. Main fuse: T2A. Rated current 0.85A JNASE-1A - 120 V 50/60 Hz. Main fuse: T2A. Rated current 0.85A JNASE-2A - 230 V 50/60 Hz. Main fuse: T2A. Rated current 0.85A |
| Nominal power | 70 W |
| Temperature selection | Room temp. / 150 - 450 oC / 300 - 840 oF |
| Operating Temp. Range | 10 - 50 oC / 50 - 122 oF |
| Cool Mode | Temp. off. Used to blow air at room temperature |
| Connectors | USB-A / USB-B RJ12 for RS232 Pedal / Stand |
| Air Flow Regulation | 0.15 - 2.5 SLPM |
| Vacuum | 53% / 397 mmHg / 15.6 inHg |
JBC Tools PCB Preheater
The use of JBC Preheaters is indispensable for rework on multi-layered PCBAs and/or large ground planes in order to avoid thermal shock and facilitate soldering as well as desoldering processes.
For an optimal result it is necessary to preheat the PCB and its components with controlled temperature profiles within the recommended limit values for each application. JBC Preheaters feature temperature profiles specially designed for this purpose and customizable according to need.
RHN
Rework Hand Support
An indispensable tool for precision work which provides a point of support very close to the working zone, allowing the stabilization of the pulse rate.
PHNK
Nano Preheater Set
The best solution for rework on small PCBAs, such as the ones commonly used in smartphones. It features a heating area of 108 x 70 mm / 4.25 x 2.75 in and two TC connections. Preheater can be operated easily and conveniently via the intuitive menu navigation and has matchless reliability in temperature accuracy and control of the PCBA so that no component is damaged. It features three work modes: Power Mode (working at a fixed power level), Temperature Mode (keeps PCBA at a selected temperature) and Profile Mode (allows control of the heating rate of the PCBA).
JBC Tools PHNK Specifications
| Dimensions (preheater unit) | 179 x 165 x 41.5 mm / 7.04 x 6.5 x 1.63 in |
| Weight (preheater unit) | 1.2 Kg / 2.6 lb |
| Ref. - Voltage (AC) |
PHNE-9KA - 100 V 50/60 Hz. Fuse: 4A. PHNE-1KA - 120 V 50/60 Hz. Fuse: 4A. PHNE-2KA - 230 V 50/60 Hz. Fuse: 2A. |
| Maximum Power | 300 W |
| Temperature Range | 50 - 250 oC / 120 - 482 oF |
| Operating Temp. Range | 10 - 50 oC / 50 - 122 oF |
| Temperature Measurement | Thermocouple type K |
| JBC Set Temperature Profiles | 3 profiles (2,3 or 4 steps) |
| User Profiles | 20 (up to 6 steps for each) |
| Maximum Work Time | 600 min or indefinite |