HAKKO CHP DPF-300 Depaneling System Product Guide

American Hakko Products, Inc.

HAKKO CHP DPF-300 Depaneling System Product Guide

Bulletin No: PB450 Issue Date: 9-1-2020 Effective Date: 9-1-2020 Description/Title: New CHP DPF-300 Depaneling System Part No: DPF-300-E Specification: Part No. DPF-300-E Dimensions 64 X 70 X 95 cm (25 X 28 X 37 in) Clearance 164 X 170 cm (65 X 67 in) Weight 73 kg (161 lbs) Voltage 115V/60Hz Power 1 kW Motor spindle power 0.27 kW Micro-spindle Speed 24,000 RPM Noise Level 80 dB(A) ± 3 dB(A) measured at the operator position. Test FR4 thck.1.6 mm / cutter 2 mm Vibrations -10°C to 50°C (14°F to 122°F) Working temperature 5°C to 35°C (41°F to 95°F) Interchangeable Guide Material Hardened ground steel ESD Safe Yes Safety Approval

PCB Characteristics Thickness Max. 4 mm Slot Length Min. 11 mm Slot Width 1.5 - 2.5 mm Slot Width Tolerance 0 / -0.02 mm Isthmus Distance From Components Min. 0.8 mm PCB Material FR4/CCL/CEM/Aluminum* For aluminum depaneling, contact American Hakko Products, Inc. for milling bit specifications

Specifications (continued):

Interchangeable guide and milling bit sizes:

• 1.5mm
• 1.6mm
• 1.8mm
• 1.9mm
• 2.0mm
• 2.1mm
• 2.2mm
• 2.3mm
• 2.4mm
• 2.5mm

Comments:

The CHP DPF-300 Depaneling System is a direct upgrade from the popular CHP DPF-200. The DPF-300 adapts all the benefits of DPF-200, and the system is now equipped with an industrial type electrical motor spindle, eliminating the need for compressed air.

When using a standard blades or manual tools to cut the PCBs from an array on a panel, stress often breaks or tears the PCB tab. The DPF-300 milling cutter cuts the tab with the same quality as an expensive automated system but at a much lower cost.

The shape of the interchangeable guide assists the operator to safely place and maneuver the PCBs until the cut is completed. This prevents damage to the PCB should the operator insert the wrong size guide that does not match perfectly with the geometry and size of the panel’s slot. A powerful vacuum pump located at the guide, removes the PCB dust from the work area for a clean and healthy work environment.

The table is made of steel with a laminated ESD safe tabletop to protect against electrostatic discharge. The table’s steel construction provides a sturdy and stable working platform, and the high speed precision spindle operates with minimum vibration. ESD safe zinc coated steel front feet and heavy duty rear casters make the system easy to move to another location.

For more information, please visit www.HakkoUSA.com, e-mail [email protected], or call 1-800-88-HAKKO (42556).