The ideal solution for soldering processes requiring a free hand.
Intuitive menu and interface
A user-friendly interface that allows you to program and personalize your station, feeder and tool settings to make your soldering process more productive.
It allows the operator to work more efficiently thanks to its 3 working modes:
Continuous Mode - Allows the operator to manually control the amount of solder wire being fed at selected speed.
Discontinous Mode - Allows the operator to program the solder wire speed and length that will automatically be dispensed when the button of the tool is pressed.
Program Mode - The operator can customize up to 5 programs, each one with 3 different steps, making the process more dynamic and efficient.
|
Solder wire The station allows a solder reel up to 2kg / 4.40 lb (DIN 100). |
Intelligent Heat Management The station incorporates Sleep & Hibernation Modes that lower tip temperature when the tool is placed in Tool Holder. As a result, JBC tip life lasts up to 5 times longer than other brands. |
 |
 |
 |
|
Guide Sets Available with or without solder wire perforation. The perforation allows better flux flow and outgassing, avoiding solder and flux splashing during the soldering process. |
Tip Cleaning System An integrated tip cleaner with antisplash rubber to prevent splashes of solder particles and maintain the work area clean. The most complete Cleaning System allows you to choose from two safe methods according to your needs: metallic wool and sponge. |
Quick Cartridge Extractor and Holder Save time and increase productivity by using Quick Cartridge Extractor, which facilitates fast and safe use. Cartridge Holder allows storing of up to four cartridges. |
Specifications
|
|
|
||||||||
|
|
|
||||||||
|
|
|
||||||||
|
Complies with CE standards. ESD Protected. |
|
ALE250 Auto-Feed Iron
The perfect tool when solder amount consistency is required across repetitive solder joints.
|
Control Button By pressing a single button, the tool automatically feeds the precise amount of solder programmed in the station. |
GALE10V Guide Kit The tool is compatible with solder wires from 0.38 mm / 0.015 in up to 1.80 mm / 0.073 in. |
Cartridge Range ALE250 Auto-Feed Iron works exclusively with C250 Cartridge Range, which features straight and bent tips to best suit your working needs. |
|
Bevel |
Conical Bent |
Chisel |
Chisel Bent |
Guide Tube Sets for ALE250
References with Solder Wire Perforation
| Ref. | Solder Wire Ø |
| GALE08V | 0.8 mm / 0.032 in |
| GALE10V | 1.0 mm / 0.040 in |
| GALE12V | 1.2 mm / 0.047 in |
| GALE15V | 1.5 mm / 0.059 in |
| GALE16V | 1.6 mm / 0.063 in |
References without Solder Wire Perforation
| Ref. | Solder Wire Ø |
| GALE04D | 0.38-0.40 mm / 0.015-0.016 in |
| GALE05D | 0.46-0.56 mm / 0.018-0.022 in |
| GALE06D | 0.60-0.64 mm / 0.023-0.025 in |
| GALE07D | 0.70-0.78 mm / 0.028-0.031 in |
| GALE08D | 0.80-0.82 mm / 0.032-0.033 in |
| GALE10D | 0.90-1.10 mm / 0.036-0.044 in |
| GALE12D | 1.14-1.27 mm / 0.045-0.051 in |
| GALE15D | 1.50-1.57 mm / 0.060-0.063 in |
| GALE16D | 1.60-1.63 mm / 0.063-0.065 in |
| GALE18D | 1.80 mm / 0.073 in |