Identco TT700 Thermal Transfer Gloss White Polyester Film Product Guide
| Face Stock: 2 mil topcoated gloss white polyester offers excellent abrasion and harsh chemical resistance. The material performs best on the topside of a circuit board where heat exposure is limited. The material will not shrink and is designed to be UV flexographic, digital and thermal transfer printed | Adhesive: 0.9 mil high performance permanent acrylic adhesive offering excellent harsh chemical resistance and high temperature performance. | Release Liner: 50# kraft liner designed to offer excellent performance for both manual and automatic application. |
Thermal Transfer Gloss White Polyester Film
TT700 is specifically designed for UV flexographic and digital pre-printing; and on-demand thermal transfer printing of variable information. Key features include: indoor and outdoor applications and excellent smudge, solvent and abrasion resistance. When used in combination with the recommended IDENTCO ribbon, it will meet the most demanding durable labeling requirements. Excellent choice for automatic application.
Typical Applications
Name plates
Rating Plates
Serial identification labels
Industrial Barcodes
Electronic Components Marking
Typical Industry
Sectors
Automotive
Electronics
Industrial
 |
Agency Recognitions UL-MH16873/MH16225 CSA-089882_L_000` |
 |
Adhesion
|
 |
Material Caliper
|
 |
Exterior Durability
|
 |
Temperature Range Service Temperature: -40 ̊F to 302 ̊F (-40 ̊C to 150 ̊C) Minimum Application Temperature: 50 ̊F (10 ̊C) |
||||||||||||||||||||||||||||||||
 |
Shelf Life Recommended Storage: 45-90 ̊F (7-32 ̊C) 20-75% R.H. Shelf Life: 2 years @ recommended storage |
||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||
 |
Chemical Resistance
|
||||||||||||||||||||||||||||||||
 |
Process Durability It is recommended that customers test the material in actual application to determine if the material meets all requirements. |
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by IDENTCO customers for designs and specifications, or be relied on as meeting specific performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact IDENTCO for further information. Revised 4/15/19.