Identco TT403 Thermal Transfer Gloss White Polyimide Film

Identco TT403 Thermal Transfer Gloss White Polyimide Film

Thermal Transfer Gloss White Polyimide Film

TT403 is designed for thermal transfer printing of variable information for circuit board labeling. This high-performance label withstands multiple passes through inline and batch cleaning processes; as well as very good resistance to most fluxes. TT403 performs well through most lead and lead-free re-flow processes.

Typical Applications

In-process circuit board labeling.

Typical Industry Sectors

Medical
Electronics
Industrial

identco.com

	Agency Recognitions UL-MH16873/MH16225
	Adhesion Stainless Steel     Epoxy Panel     20 minute dwell 35 oz/in 390 N/m 20 minute dwell 29 oz/in 320 N/m 72 minute dwell 43 oz/in 490 N/m 24 hour dwell 31 oz/in 350 N/m
	Material Caliper See following charts for specific details.
	Exterior Durability Recommended: Indoor use only
	Temperature Range See following charts for specific Temperature Ranges.
	Shelf Life Recommended Storage: 45-90 ̊F (7-32 ̊C) 20-75% R.H. Shelf Life: 2 years @ recommended storage
	Recommended Ribbons TTRR-B TTRR-D TTRR-CR

Product Details

Performance Properties

Performance properties tested on TT416 printed with IDENTCO Series TTRR-D thermal transfer ribbon. Printed samples of TT416 were laminated to aluminum and allowed to dwell 24 hours before exposure to the indicated environmental conditions.
* TT403 is not recommended for outdoor use.

Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not b relied upon by IDENTCO customers for designs and specifications, or be relied on as meeting specific performance criteria. Customers desiring to develop specifications or performance criter for specific product applications should contact IDENTCO for further informati n. Revised 3/7/2017.

Performance Properties

Samples printed with TTRR-B, TTRR-CR, & TTRR-D thermal transfer ribbons. Samples laminated to epoxy PC board. Test samples exposed to indicated environments. Test samples baked 4 minutes at 160°C before testing. All test samples were immersed in the test fluids for 10 minutes. Samples were rubbed 10 times with cotton swab saturated with the test fluid.

Rating Scale: 1=no visible effect. 2=slight smear or print removal, detectable but minimal smear. 3=moderate smear or print removal (print still legible).
4=severe smear or print removal (print illegible or just barely legible. 5=complete print removal

Test samples were printed with TTRR-D thermal transfer ribbon. Labels were printed with alphanumerics and barcodes. Test samples were subjected to 3 cycles of 3 minute immersions immediately followed by a toothbrush rub after each immersion.

Product testing, customer feedback and history of similar products support a customer performance expectation of at least two years from the date of receipt for this product as long as this product is stored in its original packaging in an environmment between 45-90°F (7-32°C) and 20-75% RH. We are confident that our product will perform well beyond this time frame however it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product’s fitness for use in their actual applications.

Trademarks: ANSI: American National Standards Instite (U.S.A.) • ASTM: American Society for Testing and Materials (U.S.A.) • All S.I. Units (metric) are mathematically derived from the U.S. Conventional Units • Aquanox® is a registered trademark of the Kyzen Corporation • Atron® is a registered trademark of Zestron Corporation • Ionox® is a registered trademark of the Kyzen Corporation • Micronox® is a registered trademark of the Kyzen Corporation • PolykenTM is a trademark of Testing Machines Inc. • PSTC: Pressure Sensitive Tape Council (U.S.A.) • UL: Underwriters Laboratories Inc. (U.S.A.) • Vigon® is a registered trademark of Zestron Corporation • Weather-Ometer® is a registered trademark of Atlas material Testing Technology LLC

Material may not be reproduced or distributed in any form with written permission.

Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not b relied upon by IDENTCO customers for designs and specifications, or be relied on as meeting specific performance criteria. Customers desiring to develop specifications or performance criter for specific product applications should contact IDENTCO for further informati n. Revised 3/7/2017.