DESCO INDUSTRIES INC TECHNICAL BULLETIN TB-7000Reztore® Surface & Mat Cleaner Application Instructions |
|
It is recommended to test the surface after cleaning to ensure that all insulative contaminants such as dirt and grime have been removed. Reztore® Surface & Mat Cleaner will only leave behind a coating with a surface resistance of less than 1 x 109 ohms. Storage Reztore® Surface & Mat Cleaner product does not have a set life span. The chemicals are not known to degrade over time when stored at the proper temperature conditions as stated in the Safety Data Sheet. We also recommend that this product be stored in its original container and be sealed when not in use. |
Directions Figure 2. Applying Reztore® to the mat Other Surfaces - Keyboards:
On non-ESD surfaces, we recommend using Reztore® Topical Antistat static dissipative coating. While coating is on the surface it will enhance existing ESD surfaces and will give dissipative electrical properties to insulative surfaces.
DESCO for service and support in North America
for service and support in United Kingdom and Europe
for service and support in Asia
|
SAFETY DATA SHEET
May be used to comply with OSHA Hazcom 29 CFR 1910.1200, Reg. (EU) No.453/2010 and Japan JIS 7253-2012). Standards must be consulted for specific requirements.
Revision Date: 2018-06-26
| SECTION 1 — IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING |
1.1 Product identifiers
| Product Name: | Reztore® Surface and Mat Cleaner |
| EC No.: | None |
| REACH Registration No.: | None |
| CAS No.: | None |
1.2 Relevant identified uses of the substance or mixture and uses advised against
| Identified use: | Cleaner, ESD Surface & Mat |
1.3 Details of the supplier of the safety data sheet
| Supplier: | DESCO INDUSTRIES INC |
| United States | United Kingdom | Japan |
| One Colgate Way | 2A Dunhams Lane | 661-1 Yachimata-ho |
| Canton, MA 02021 | Letchworth Garden City | Yachimata-Shi |
| +1 781-821-8370 | Hertfordshire, SG6 1BE | Chiba-Ken 289-1115 |
| +44 (0) 1462 672005 | +81 43-309-4470 |
| Email Address: | [email protected] |
| 1.4 Emergency telephone number | |
| United States: | +1 781-821-8370 |
| United Kingdom: | +44 (0) 1462 672005 |
| Japan: | +81 43-309-4470 |
| Office hours: 8:00 AM - 5:00 PM |
| SECTION 2 — HAZARDS IDENTIFICATION |
2.1 Classification of substance or mixture
Classification according to OSHA Hazcom 29 CFR 1910.1200, Regulation (EC) No 1272/2008, JIS 7252-2014
| Flammable liquid | Category 3 |
| Eye irritation | Category 2 |
| Specific target organ toxicity (Single exposure) | Category 3 |
2.2 Label elements
Labelling according to OSHA Hazcom 29 CFR 1910.1200, Regulation (EC) No 1272/2008, JIS 7252-2014
| Hazard pictograms/Symbols: | ![]() |
| Signal word: | Warning |
| Hazardous statements: |
H226 Flammable liquid and vapor H319 Causes serious eye irritation H336 May cause drowsiness or dizziness |
|
Precautionary statements:
|
Prevention P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P241 Use explosion-proof electrical/vetilating/lighting equipment. Response P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. P305 + P351 + P338 + P337 + P313 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. |
2.3 Other hazards |
N/A |
SECTION 3 — COMPOSITION/INFORMATION ON INGREDIENTS
3.2 Mixture
| Components | CAS No. | %wt. | Classification |
|
Isopropanol
|
67-63-0
|
5 - 25 %
|
OSHA 29CFR 1910.1200: Flammable liquids - Category 2 Eye Irritation - Category 2A STOT - Category 3 Reg. (EC) No. 1272/2008: Flammable liquids - Category 2 Eye Irritation - Category 2 STOT - Category 3 JIS 7252-2014 Flammable liquids - Category 2 Eye Irritation - Category 2 Reproductive toxicity - Category 2 STOT SE - Category 1,3 STOT RE - Category 1,2 |
| SECTION 4 — FIRST AID MEASURES |
4.1 Description of first aid measures
| Eye Contact | Flush with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. |
| Skin Contact | Wash with soap and water. If skin irritation occurs: Get medical advice/attention. |
| Ingestion | Drink several glasses of water. DO NOT induce vomiting. Contact a physician. |
| Inhalation | Move subject to fresh air. |
4.2 Most important symptoms and effects, both acute and delayed
None known
4.3 Indication of any immediate medical attention and special treatment needed
Treat symptomatically
| SECTION 5 — FIRE FIGHTING MEASURES |
5.1 Extinguishing media
| Suitable Extinguishing Media | Use an extinguishing agent suitable for the surrounding fire |
| Unsuitable Extinguishing Methods | N/A |
5.2 Special hazards arising from the substance or mixture
| Hazards from the substance or mixture | : Unknown |
| Hazardous thermal decomposition products | : Unknown |
5.3 Advice for firefighter
Special protective actions for fire-fighters: Cool endangered receptacles with water spray. Remove containers from path of fire when safe to do so. Do not approach containers suspected to be hot.
Special protective equipment for fire fighters: Wear self-contained breathing apparatus and protective suit.
| SECTION 6 — ACCIDENTAL RELEASE MEASURES |
6.1 Personal precautions, protective equipment and emergency procedures
Wearing protective clothing. Inhalation protection. Extinguish all ignition sources.
6.2 Environmental precautions
Biodegradable
6.3 Methods and materials for containment and cleaning up
Contain and collect material into plastic container. Water rinse and drain, flush small amounts. Use sanitary landfill disposal. Follow national and local regulations (RCRA; Subtitle D).
If Material is Released/Spilled: Keep spectators away. Contain spill with inert material (e.g. sand, earth). Keep spills and cleaning runoffs out of municipal sewers and open bodies of water.
6.4 Reference to other sections
See SECTION 1, Emergency contact information.
See SECTION 8, Information on appropriate personal protective equipment.
See SECTION 13, Disposal Considerations, for information regarding the disposal of contained spills.
| SECTION 7 — HANDLING AND STORAGE |
7.1 Precautions for safe handling
Use in well-ventilated areas; avoid breathing vapors. Keep containers closed when not in use. Avoid from freezing.
7.2 Conditions for safe storage, including any incompatibilities
Store in a cool, dry place with adequate ventilation. Keep from freezing - product may coagulate.
Storage temperature: Max. 49°C/120°F 1°C/34°F
| 7.3 Specific end uses | N/A |
| SECTION 8 — EXPOSURE CONTROL / PERSONAL PROTECTION |
8.1 Control parameters
If exposure limits exist, they are listed below. If no exposure limits are displayed, then no values are applicable.
| Component | Regulation | Type of listing | Value/Notation |
| Isopropanol CAS No.: 67-63-0 |
EU ACGIH EU ACGIH US OSHA Z-1 |
TWA STEL TWA |
200 ppm 400 ppm 980 mg/m3 400 ppm |
8.2 Exposure controls
| Technical Control Measures | Preferences of technical measure to prevent or control contact with the product. Isolating process and personnel, mechanical ventilation (dilution and local exhaust) and the regulation of process conditions. In case of non-prevention or non-control, a proper protective wearing should be used. |
| Hygiene Measures | Wash hands before eating, smoking, or using washroom facilities |
| Individual protection measures | |
| Eye/Face Protection |
Avoid contact with eyes. Use safety eye wear with splash guards or sideshields (ANSI Z-87.1). For EU: Safety glasses (with side shields) should be consistent with EN 166 or equivalent. |
| Skin Protection | No precautions other than clean body covering clothing should be needed. |
| Hand Protection | Chemical protective gloves is not needed when handling this material. Consistent with general hygienic practice for any material, skin contact should be minimized. In case of using gloves, use gloves chemically resistant to this material. Examples of preferred glove barrier materials include: Neoprene. Nitrile/butadiene rubber ("nitrile" or "NBR"). Polyvinyl chloride ("PVC" or "vinyl"). Avoid gloves made of: Polyvinyl alcohol ("PVA"). For EU: In case of using gloves, use chemical resistant gloves classified according to standard SS-EN 374: Protective gloves against chemical and microorganisms. In case of prolonged contact or repeated contact, it is recommended gloves with protection index grade 4 or higher (breakthrough time longer than 120 minutes according to standard SS-EN 374). When only short-term contact is expected, it is recommended gloves with protective index class 1 or higher (breakthrough time longer than 10 minutes according to standard SS-EN 374). |
| Respiratory Protection | For most conditions no respiratory protection should be needed; however,if discomfort is experienced, use an approved air-purifying respirator. Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines. In the case of vapor formation use a respirator with an approved filter. If there are no applicable exposure limit requirements or guidelines, wear respiratory protection when adverse effects, such as respiratory irritation or discomfort have been experienced, or where indicated by your risk assessment process. For EU: Use the following CE-approved filters: Filters against organic gases with prefilter to particles, type AP2. |
| Ingestion | Use good personal hygiene. Do not consume or store food in the work area. Wash hands before smoking or eating. |
| SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES |
9.1 Information on basic physical and chemical properties
| Appearance | : Liquid |
| Color | : Clear violet |
| Odor: | : Floral Alcohol |
| Odor Threshold | : No data available |
| pH | : 6.0 - 8.0 |
| Melting Point | : No data available |
| Boiling Point | : >200°F (93.3°C) |
| Flash Point | : 106°F (41°C) |
| Evaporation rate | : 0.28 |
| Flammability: | : Flammable |
| Upper flammability or explosive limits | : No data available |
| Lower flammability or explosive limits | : No data available |
| Vapor Pressure (mm Hg) | : 18.0 |
| Vapor Density (air=1) | : 1.06 |
| Relative Density | : 8.17 lbs./gal at 20°C |
| Specific Gravity (H2O = 1) | : 0.98 |
| Solubility | : Completely |
| Partition coefficient | : No data available |
| Auto-ignition temperature | : No data available |
| Decomposition temperature | : No data available |
| Viscosity | : No data available |
| Explosive properties | : No data available |
| Oxidizing properties | : No data available |
9.2 Other information
| VOC per Method 24 of EPA | : 9.4% VOC by wt. |
| SECTION 10 — STABILITY AND REACTIVITY |
10.1 Reactivity
N/A
10.2 Chemical stability
Stable product at normal conditions.
10.3 Possibility of hazardous reactions
N/A
10.4 Conditions to avoid
Temperatures above 100°F (38°C) and below 34°F (1°C)
10.5 Incompatible materials
Strong Oxidizers.
10.6 Hazardous decomposition products
Thermal decomposition may yield carbon monoxide.
| SECTION 11 — TOXICOLOGICAL INFORMATION |
11.1 Information on toxicological effects
Acute Toxicity
| Acute Effects | |
| Inhalation | Slight irritation |
| Eye Contact | Slight irritation |
| Skin Contact | Slight irritation |
| Ingestion | N/A |
| Isopropanol | Oral Toxicity | (Rat) | LD50 = 5,045 mg/kg |
| CAS No.: 67-63-0 | Dermal Toxicity | (Rabbit) | LD50 = 12,800 mg/kg |
| Inhalation Toxicity | (Rat) | LC50 = 37.5 mg/l (4 h) |
| SECTION 12 — ECOLOGICAL INFORMATION |
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
The product is aqueous.
12.5 Results of PBT and vPvB assessment
No data available
12.6 Other adverse effects
Product:
| Additional ecological information | According to experience and to the information currently available, the product has no harmful effects on the environment if used correctly as intended. |
| SECTION 13 — DISPOSAL CONSIDERATIONS |
| 13.1 Waste treatment methods | |
| Product: |
Contain and collect material into plastic container. Water rinse and drain,flush small amounts. Use sanitary landfill disposal. Follow state and local regulations (RCRA; Subtitle D). |
| 13.2 Additional information | N/A |
| SECTION 14 — TRANSPORT INFORMATION |
| DOT (Department of Transportation) | Not regulated for transport |
| Classification for SEA transport (IMO-IMDG) | Not regulated for transport |
| Classification for AIR transport (IATA/ICAO) | Not regulated for transport |
| 14.1 UN Number | None |
| 14.2 UN proper shipping name | None |
| 14.3 Transport hazard class(es) | None |
| 14.4 Packing group | None |
| 14.5 Environmental hazards | None |
| 14.6 Special precautions for user | None |
| 14.7 Transport in bulk according to Annex II of MARPOL and the IBC Code | Not applicable |
| SECTION 15 — REGULATORY INFORMATION |
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
US Regulations:
Superfund Amendment and Reauthorization Act of 1986 Title III (Emergency Planning and Community
Right-to-Know Act of 1986)
| Section 302 | No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. |
| Section 313 | The following components are subject to reporting levels established by SARA Title III, Section 313:Isopropanol (CAS No.: 67-63-0) |
Right To Know
| Massachusetts RTK | Pennsylvania RTK | New Jersey RTK | |
| Isopropanol CAS No.: 67-63-0 |
X | X | X |
California Proposition 65
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any otherreproductive harm.
The components of this product are reported in the following inventories:
| EINECS Status | All components of this product are listed or excluded from the EINECS Inventories |
| TSCA | All components of this product are listed or excluded from listing on United States Environmental Protection Agency Toxic Substances Control Act (TSCA) Inventory |
| REACH | This product does not required REACH registration according to Regulation (EC) 1272/2008 |
| 15.2 Chemical Safety Assessment | N/A |
| SECTION 16 — OTHER INFORMATION |
| HMIS RATING | Health 1, Flammability 2, Reactivity 0, Personal Protection B |
| NFPA RATING | Special Hazard: N/A, Health: 1, Flammability: 2, Instability: 0 |
| SDS Updated | 2018-06-26 |
Disclaimer
OTHER INFORMATION: This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process. Such information is to the best of the company’s knowledge and believed accurate and reliable as of the date indicated. However, no representation, warranty or guarantee of any kind, express or implied, is made as to its accuracy, reliability or completeness and we assume no responsibility for any loss, damage or expense, direct or consequential, arising out of use. It is the user’s responsibility to satisfy himself as to the suitableness and completeness of such information for his own particular use.

