DESCO MULTI-MOUNT MONITOR, NORTH AMERICA

  • SKU: DES19651
  • Brand: DESCO
  • $148.48
  • List Price: $153.07
  • You Save: 3.00%

Desco's Single Workstation Continuous Monitor will continuously monitor the path-to-ground integrity of one operator and one ESD worksurface

  • IMPROVED Operator Alarm
    Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor's jack is intermittent
  • NEW Mat Monitor Switch
    Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
  • NEW Audible Alarm Adjustment
    Sets the buzzer's volume from loud to louder
  • NEW 19653 Remote Alarm Accessory
    Connect to the Multi-Mount Monitor and place in the operator's field of view to alert operator of alarms
  • Desco Wave Distortion Technology
    Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap's path-to-ground* and the presence of its 1 megohm safety resistor
  • Park Snap
    Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
  • Single-Wire Impedance Design
    Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
  • 1.2 Volt Operator Test Voltage
    Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
  • <50 Millisecond Alarm Response Time
    Identifies failures and intermittencies that inferior technologies miss
  • Continuous Visual and Audible Alarms
    Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs
  • Calibration Verification
    Use the Desco 98220 Monitor Calibration Unit to check the test limits of Wave Distortion Monitors without removing them from their workstations
  • NIST Calibrated with Certificate Included
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
  • 100-240VAC Power Adapter with North American Plug
    Works with standard electrical systems in North America, Japan and Asia
  • Made in the United States of America
    This item is made and stocked in Chino, CA